Latest Weekly News
Extension Lead Cable Size Guide UK: 1.5mm vs 2.5mm vs 4mm
Short answer: the cable size quoted for an extension lead (1.25mm, 1.5mm, 2.5mm or 4mm) is the cross-sectional area of each copper conductor, not the outside thickness of the cable. A larger conductor carries current with less voltage drop and less heating, which matters more as the lead gets longer and the load gets heavier. On UK construction sites, 1.5mm is common for lighter 16A tools over short to medium runs, 2.5mm for heavier 16A tools or longer runs, and 2.5mm or 4mm for 32A circuits.
This guide explains what the numbers mean and how to choose between them, with a comparison of the 110V and 240V leads we supply. All product figures come from Connexion Electrical’s own product data sheets.
What does 1.5mm, 2.5mm or 4mm mean on an extension lead?
The figure is the conductor’s cross-sectional area in square millimetres (mm²). A “2.5mm” lead has 2.5mm² live, neutral and earth conductors, so “how thick is 2.5mm cable” refers to the copper, not the sheath. The outer diameter depends on the insulation and sheath and varies between cable types.
Why cable size matters
- Voltage drop: every metre of cable has resistance. A larger conductor has lower resistance, so more of the supply voltage reaches the tool, which is especially relevant on 110V site supplies.
- Heat: a conductor that is too small for the load runs warmer. Always fully uncoil a lead in use.
- Handling: larger cable is heavier and stiffer, so it is not always the best choice for short runs and light tools.
1.5mm vs 2.5mm vs 4mm: how to choose
| Cable size | Typical use (Connexion range) | Connectors in our range |
|---|---|---|
| 1.25mm | 240V household / office extension cables | 13A plug and socket |
| 1.5mm | Lighter 110V and 240V tools and lighting, shorter runs | 13A or 16A |
| 2.5mm | Heavier 16A tools, longer 16A runs, and 32A leads | 16A or 32A |
| 4mm | 32A 110V circuits where lower voltage drop matters, e.g. feeding splitter boxes | 32A |
Match the lead to the outlet and the equipment first (voltage, then current rating: 13A, 16A or 32A), then choose the cable size for the length and load. If in doubt about a specific installation, ask a qualified electrician.
Connexion extension leads by cable size
| Part | Voltage | Length | Cable size | Connectors |
|---|---|---|---|---|
| 10837 | 110V | 10m | 1.5mm | 16A plug / 16A coupler |
| 10801 | 110V | 14m | 1.5mm² | 16A plug / 16A coupler, IP44 |
| 10827 | 110V | 25m | 1.5mm | 16A plug / 16A coupler, IP44 |
| 10802 | 110V | 14m | 2.5mm² | 16A plug / 16A coupler, IP44 |
| 10803 | 110V | 25m | 2.5mm² | 16A plug / 16A coupler, IP44 |
| 10829 | 110V | 14m | 2.5mm² | 32A plug / 32A coupler, IP44 |
| 10838 | 110V | 25m | 2.5mm² | 32A plug / 32A coupler, IP44 |
| 10826 | 110V | 14m | 4.0mm² | 32A plug / 32A coupler, IP44 |
| 10839 | 110V | 25m | 4.0mm² | 32A plug / 32A coupler, IP44 |
| 10804 | 240V | 14m | 1.5mm | 13A plug / 13A socket, IP44 |
| 10805 | 240V | 14m | 1.5mm | 16A plug / 16A socket, IP44 |
| 10823 | 240V | 14m | 2.5mm | 32A plug / 32A socket, IP44 |
| 10732 | 240V | 15m | 1.25mm | 13A plug / 1 x 13A socket |
Browse all 110V extension leads and 240V extension leads.
110V or 240V?
On UK construction sites, portable tools and lighting normally run on 110V from a centre-tapped-to-earth site transformer, with yellow BS EN 60309 connectors. Blue connectors identify 230/240V. See our guide to why construction sites use 110V.
Frequently asked questions
What size cable is an extension lead?
It depends on the lead. In our range, 240V household-style cables use 1.25mm, general 110V and 240V site leads use 1.5mm, heavy-duty 16A and 32A leads use 2.5mm, and the heaviest 32A 110V leads use 4mm.
Is 2.5mm better than 1.5mm for an extension lead?
2.5mm has a larger conductor, so it has lower voltage drop over the same length. It is the better choice for longer runs and heavier tools; 1.5mm is lighter and easier to handle for shorter runs and lighter loads.
How thick is 2.5mm cable?
2.5mm is the area of each copper conductor (2.5mm²), not the overall diameter of the cable.
What cable size do 32A extension leads use?
Our 110V 32A leads use 2.5mm² (10829, 10838) or 4.0mm² (10826, 10839). Our 240V 32A lead (10823) uses 2.5mm.
Should I fully unwind an extension lead?
Yes. Fully uncoil a lead before use so the cable does not overheat under load.
Where to buy: Connexion Electrical Ltd supplies these 110V and 240V extension leads from London, UK. Trade customers can log in to see prices, or use our product enquiry form.
